Browse all practice questions for the DC 311 Aqueous Film Forming Foam (AFFF) Transfer Station Operator Practice Test. Search by topic, open any question and review its full explanation, then test yourself in the practice quiz.

DC 311 Aqueous Film Forming Foam (AFFF) Transfer Station Operator Practice Test course image
More practice questions

These questions are part of the practice quiz. Start practicing

  • Which document is most directly used to verify that personnel have completed required training on AFFF handling?
  • What percentage of seawater to AFFF is used to make the final AFFF solution?
  • Which document specifies when to use AR-AFFF?
  • What indicates a possible H2S leak?
  • How many proportioning pumps are found on stations?
  • The two types of SOPVs are Master and Group. Master SOPVs are what?
  • How should a near-miss incident be documented?
  • AFFF mixing stations are located through which level of the ship?
  • What should be done after documenting an emergency shutdown sequence for a foam transfer line?
  • Are the injection pumps horizontally or vertically aligned?
  • How should a transfer station test foam solution quality before operating on a live fire?
  • Where is the other AFFF Transfer System Station located?
  • The injection pump supplies to which area of the ship?
  • What is the purpose of a pre-operation briefing before starting a transfer?
  • Which statement describes the color coding for AFFF solution valves?
  • What are typical components of an AFFF foam SDS and why are they important?
  • What rated flow do the injection pumps provide?
  • Master SOPV's will always what?
  • What labeling information should be present on a container for AFFF concentrate?
  • What is the recommended procedure for handling contaminated PPE after exposure to AFFF?
  • What color are the Firemain valves?
  • Which health hazards are associated with AFFF exposure?
  • Which SOPV is capable of being secured only locally on stations?
  • The single AFFF hose reel consists of how many feet of non-collapsible hose?
  • Where should foam concentrate be stored and labeling requirements apply?
  • Why should grounding and bonding be used during AFFF concentrate transfer?
  • What is the correct percentage of AFFF concentrate in the final AFFF solution?
  • Power to the SOPV interior components is supplied by what voltage?
  • What types of documentation are typically reviewed during compliance audits for AFFF operations?
  • On which hull level are the AFFF mixing stations located?
  • What is the primary purpose of the written transfer procedure for concentrate?
  • What are the two types of SOPVs?
  • Each AFFF Transfer System Station pumps is rated at how many GPM's?
  • Hytrol valves operates Group Control Valves supplying what areas?
  • Which location would you NOT expect AFFF systems to be installed?
  • How should an operator respond to a potential PFAS spill in the environment?
  • What is the recommended practice for grounding before connecting hoses?
  • What does PFAS stand for, in the context of environmental concerns with AFFF?
  • Which of the following is a credible sign of a potential problem in a foam transfer line?
  • How should concentrate labels and SDS be accessible to operators?
  • How many gallons of AFFF does each tank hold?
  • What does SOPV stand for?
  • What are the two types of pumps found on station?
  • The AFFF system employs which two pump types?
  • The Tank Level Indicator's orange flaps indicate how many gallons per flap?
  • What do the AFFF proportioning pumps service?
  • How many AFFF mixing stations are on board?
  • The second AFFF Transfer System Station is positioned outboard of AFFF station 13 adjacent which line?
  • What is the key difference between AFFF and AR-AFFF?
  • What is the purpose of a foam proportioner in an AFFF system?
  • What type of AFFF concentrate do we use?
  • All 21 zones are active from which location?
  • How should a transfer station handle disposal of PFAS-containing materials?
  • What is the diameter of the AFFF hose used on the reels?
  • If the injection pump is delivering 70 GPM, is this within the rated range?
  • Which item is the third check in the AFFF 'manned and ready' readiness procedure?
  • AFFF Systems are installed where?
  • Which statement describes the color coding for AFFF concentrate valves?
  • If the AFFF Transfer System Stations are normally aligned for Recirculation, what does this imply?
  • How many AFFF reserve tanks are there?
  • If a container leaks during transfer, what is the correct action sequence?
  • What steps are involved in an emergency shutdown of AFFF transfer operations?
  • Which two valve types are used to manage flow and direction in the AFFF transfer system?
  • Which statement about the AFFF proportioning pumps is correct?
  • What are typical signs of equipment failure in a foam transfer line?
  • What is the purpose of bonding during transfer?
  • Zone 21 has an alternate control location at which area?
  • What is an SPCC plan and why is it important for AFFF operations?
  • Which item would you typically include in an SDS regarding accidental releases?
  • Which SOPV is the only SOPV that operates for hosereels?
  • Where are AFFF hose reels located?
  • Where are the AFFF reserve tanks located?
  • How many AFFF Transfer System Stations do we have on board?
  • The AFFF reserve tanks are welded to the bulkhead in which hangars?
  • Which action is a fundamental housekeeping practice in AFFF storage and transfer areas?
  • If a foam spill occurs, which containment steps should be taken to prevent environmental impact?
  • In order to report an AFFF "manned and ready" how many things must you check?
  • Each AFFF Transfer System Station pump delivers how many gallons per minute?
  • What does it refer to when the Hycheck Valve has 'Checking' capabilities?
  • Each AFFF mixing station has which valves?
  • Where is one of the AFFF Transfer System Stations located?
  • If there are two reserve tanks each holding 3500 gallons, what is the total reserve capacity?
  • A Powertrol Valve is held shut by what?
  • What visual indicators show proper film formation when testing an AFFF foam solution?
  • Which pair of alternate control locations correspond to Zone 20 and Zone 21 respectively?
  • What does the Master SOPV do?
  • Which practice best supports preventing contamination during transfers at an AFFF facility?
  • In the event of an ACTUAL casualty, who can activate an AFFF station if it is needed?
  • How should SDS and emergency contact numbers be kept accessible?
  • What type of hearing protection must be worn when operating AFFF stations?
  • Casualty power can be rigged from where?
  • What is the operator's role during spill response drills?
  • What is the typical format for incident reporting in a DC 311 environment?
  • What are the critical steps in a post-transfer inspection?
  • How often should equipment calibration occur for transfer operations?
  • Zone 20 has an alternate control location at which area?
  • If the TLI is at 95%, can the AFFF system operate?
  • When the stem at the top of the Hycheck Valve rises, it is an indication of what?
  • The AFFF Transfer System Stations are normally aligned for what?
  • How should used foam solution or wash water be disposed of?
  • Which firemain pressure range is acceptable when reporting an AFFF station as ready?
  • How many injection pumps are on board?
  • Which action is essential before connecting AFFF transfer hoses to a line?
  • What is the recommended action if PPE is damaged during handling?
  • With an AFFF pump continuously running, how many minutes of AFFF will the tank provide?
  • How should AFFF waste and used absorbents be disposed of?
  • What is the purpose of secondary containment around foam concentrate storage and transfer areas?
  • Which equipment is used to transfer AFFF between mixing stations?
  • What action is typically taken to verify a transfer is complete and safe to conclude?
  • Which regulatory plans are typically applicable to AFFF use at a facility?
  • Opens Powertrol Valve by what?
  • A Hycheck Valve is held shut by what?
  • How should standby equipment and backups be managed for foam transfer?
  • What is the importance of a written transfer procedure for AFFF concentrate?
  • During what condition would you typically use casualty power?
  • Which of the following is NOT a Sprinkling System type?
  • Which action helps ensure effective post-incident follow-up?
  • Environmental concerns with AFFF and PFAS, and how should a transfer station address them?
  • The AFFF system aboard CVN74 includes how many stations?
  • A Powertrol valve has what type of capabilities?
  • How many AFFF stations are onboard CVN74?
  • Why is prompt documentation of chemical inventory changes important?
  • When an AFFF station is low, AFFF can be transferred from station to station using what and when?
  • One AFFF Transfer System Station is located on the 2nd Deck near what feature?
  • Where are the CONFLAG stations located?
  • AFFF is used primarily on what class of fires?
  • Which list accurately represents the facilities served by the AFFF proportioning pumps?
  • In the AFFF readiness procedure, which item is checked fourth?
  • Which training requirements are commonly mandated for AFFF transfer station operators?
  • Which features characterize a proper dedicated storage area for foam concentrate?
  • Which color indicates Firemain control components?
  • Automatic Bus Transfer switches power between which two modes?
  • Are the proportioning pumps horizontally or vertically aligned?
  • What foam-to-water ratios are standard for AFFF, and how can ratios vary?
  • How should standby equipment backups be managed for foam transfer?
  • A Hytrol Valve is held shut by what?
  • Which statement best describes how incompatible materials should be managed near AFFF concentrate?
  • When documenting a spill response drill, which elements should be included?
  • The SOPV is a device described as which type of valve?
  • What is the first thing you must check in order to to report an AFFF "manned and ready"?
  • Which two valves are installed at each AFFF mixing station?
  • What is the purpose of regular calibration of foam proportioners?
  • What is the WARNING regarding the inside of the SOPV?
  • What colors are the AFFF concentrate valves?
  • The Master SOPV's action includes which of the following?
  • What is the required run time of the AFFF Bilge Sprinkling System once lit off for a casualty?
  • How do you manually operate the SOPV?
  • What does AFFF stand for and what is its primary firefighting function?
  • Which housekeeping practices are appropriate for AFFF storage and transfer areas?
  • What maintenance steps are essential for foam proportioners and related equipment?
  • Which AFFF stations are injection pump only?
  • Besides from The Bridge and Pri-fly, where else can Zone 21 be operated from?
  • How many gallons does each AFFF reserve tank hold?
  • What is the role of a nozzle during foam transfer?
  • Which option best describes the location for calibration records?
  • Which statement is true about AFFF hose reel locations?
  • What colors are the AFFF solution valves?
  • From where are the AFFF reserve tanks filled?
  • Which method ensures easy access to AFFF product information for operators?
  • Which storage practice helps prevent compatibility hazards when handling AFFF concentrate?
  • Which of the following are common causes of foam system fouling at a transfer station?
  • What steps should be taken to prevent spills during transfer of AFFF concentrate?
  • Which SOPV can only be secured locally on stations?
  • The proportioning pumps are found at which stations?
  • Name two common types of foam proportioning devices used in transfer stations?
  • Which PPE is required when handling AFFF concentrate during transfer operations?
  • Which statement best reflects the documentation requirement for operator safety training for AFFF transfer activities?
  • What information should be logged in the transfer operation record?
  • How many CONFLAG stations are onboard?
  • Which locations on the ship house AFFF systems?
  • Why is stormwater management important at an AFFF transfer station?
  • How should you verify that a transfer line is properly grounded before connecting hoses?
Subscribe

Get the latest from Passetra

You can unsubscribe at any time. Read our privacy policy